How to Use the Touch Pad Control Panel
Touch pad control panel includes
one LCD Display, one Indicator
Light (Red/Green) and five touch
pad keys for dehumidifier
operations.
LCD Display:
DEHUMIDIFIER ON.
PURGE ON.
The pump is on and pumping water out of
the condensate reservoir.
DEFROST ON.
Frost forming on the coils, defrost cycle
engaged.
DELAY BAR AND COUNTDOWN.
See Start/Stop
key.
“TIMER” CLOCK.
When set to show the “TIMER”
CLOCK time, the “TIMER” CLOCK icon displays. The four
digits indicate
HOURS and MINUTES
remaining in a user
selected timed run cycle.
“TOTAL” CLOCK.
When set to show the “TOTAL”
CLOCK time, the “TOTAL” CLOCK icon displays. The
digits indicate how many
DAYS the
machine has been
used.
“JOB” CLOCK
.
When set to show the “JOB” CLOCK
time, the “JOB” CLOCK icon displays. The four digits
indicate how many
HOURS and MINUTES
are logged
against either the CURRENT JOB or the LAST JOB run.
Touch Pad Keys:
ON/OFF.
Press the ON/OFF key to turn the machine on or off.
When the machine is turned on, it comes on in STANDBY MODE.
The red indicator light and LCD light up. LCD displays the “TIMER”
CLOCK icon. Four time digits flash, which prompts the operator to
either set the “TIMER” by pressing the “TIMER” KEY or to start the
machine directly by pressing the “START/STOP” KEY.
Pressing the ON/OFF key again will turn the machine off. The red
indication light and LCD light go out.
Note
: In STANDBY MODE, the
machine will automatically turn off if there are no other keys pressed
within 15 minutes.
TIMER.
By using the “TIMER” key, the dehumidification time can be set for
a desired run time period.
The “TIMER” time setting range is from 00:00 to 23:50. It increases
by 10 minutes for every key press.
Press the “TIMER” key without releasing; the time can be adjusted
continually.
START/STOP.
Press the START/STOP key to start or stop
dehumidification.
The dehumidification startup is designed with a compressor delay.
The display reads a numerical countdown from a maximum of 90
seconds to 0. (30 second countdown for the first startup). The DELAY
BAR flashes during this countdown period.
While dehumidification is on, the display shows a “DEHUMIDIFIER
ON” icon.
The dehumidification cycle runs continuously if there is no “TIMER”
set before it starts.
Otherwise, the dehumidification cycle stops as the set “TIMER”
expires.
Pressing the START/STOP key again will stop dehumidification. The
“DEHUMIDIFICATION ON” icon goes off when the dehumidification
cycle is terminated.