Aban Technology HIGH SPEED DOME CAMERA, User Manual, Page: 23 / 40

23
22. ALRAM CHANNEL ON/OFF
- CH On/Off : Alarm Input – Each channel can be ON/OFF
- Alarm Relay : It can be set On or not when ALARM OUTOUT
PORT operate wrong.
- Active Alarm : It selects ACTIVE OPEN or ACTIVE CLOSE by
tangency when something is wrong. It is ACTIVE when ALARM INPUT
is OPEN in ACTIVE OPEN, it is ACTIVE when ALARM INPUT is
CLOSE in ACTIVE CLOSE
- Resume Time Set :
It can select the delay time that the camera move to the place
alarming to observe where wrong signal is sensed.
User can set it for 1sec to 180sec and operate GROUP, TOUR,
SWING again in a preset time. SWING, GROUP, TOUR are operated
in a preset time when user stops the operating joystick in the case of not connecting with the ALARM.
Press SWING, GROUP, TOUR keys without stopping of the joystick to stop the operating completely
(*Stopping the operating with the joystick affects the SET function.)
23. ALARM PRESET SET PAGE
■ The camera can move to a preset point automatically when
something is wrong in each ALRAM CHANNEL.
■ Set a preset point firstly to move if anything wrong, then use
that sets the preset number into each ALARM CHANNEL.
■ PRESET is out of connecting in ALARM CHANNEL No.“0”
■ User can select PRESET number 1 to 250 and set it.
■ Home Position Preset
The camera automatically moves to where master user set
when another user controls the camera to observe other area.
(You can set 1~250 points)
■ Home Position Time
It sets the dwell time in Home Position Preset.
It automatically moves to where observes ordinarily in the
regular time that Master user set in observation of other area
,if set Home Position Preset
(You can set 1~180sec. Set control Home Position Preset
and Home Position Time together for using this function.)
◄◄ CAMERA SETUP p2 ►►
18. Select Alarm : Sensor
19. Motion Detection : Off
20. Preset Set & Run Page
21.Trace Set Page
22. Alarm CH On/Off Page
23. Alarm Preset Set Page
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
18. Select Alarm : Sensor
19. Motion Detection : Off
20. Preset Set & Run Page
21.Trace Set Page
22. Alarm CH On/Off Page
23. Alarm Preset Set Page
- PREV MENU PAGE
- NEXT MENU PAGE