Aban Technology HIGH SPEED DOME CAMERA, User Manual, Page: 22 / 40

22
⑤
Tour SET Group: User can set continual Group motion that can be put 12 Groups in 1 Tour Move to the setting
page if user presses F/F key on this menu
■ The Group user wants to set must be set firstly
※ Setting is only possible when Preset is set first in the state of setting of Swing, Group, Tour, otherwise, it displays
the message “Sorry Undefined”.
⑥
Run Function: Operate one of SWING/
＊
Set / Stop order with a control keyboard without menu GROUP /
TOUR / TRACE. (It is operated on the screen. automatically after end of OSD menu)
■ User can look at how to set TRACE at TRACE SET PAGE”
⑦
RETURN MENU PAGE: Move to a higher menu page when control the joystick Right/Left in the
Selection of this menu.
21. TRACE SET PAGE
Set TRACE.
User can regenerate and save a change of the unrestricted location of
ZOOM In/Out and a position of the camera by hand-worked control
with a joystick.
User can see the screen when moves the joystick to Right/Left after
fixing the cursor on the menu
■ How to set TRACE
Move to [SET] after pressing
Check – Control scenes that user wants by hand-worked with a
joystick after the message.
“Set Trace: OO%” on the middle of the screen. If user finishes
this part, Move to [SAVE] with
It goes a higher menu after being saved data if user presses with a
display of the message “Save TRACE”
◄◄ CAMERA SETUP p2 ►►
18. Select Alarm : Sensor
19. Motion Detection : Off
20. Preset Set & Run Page
21.Trace Set Page
22. Alarm CH On/Off Page
23. Alarm Preset Set Page
- PREV MENU PAGE
- NEXT MENU PAGE