Aban Technology HIGH SPEED DOME CAMERA, User Manual, Page: 19 / 40

19
16. DAY& NIGHT
The function is used to distinguish an object clearly in the dark
condition.
▶ Auto-Low : This mode is worked automatically according to
sensitivity, if the sensitivity is low
▶
Auto-Hi : This mode is worked automatically according to
sensitivity, if the sensitivity is high.
▶
On : Change into DAY & NIGHTY mode by hand-worked
▶ Off : Set DAY & NIGHTY mode ‘off’
17. STABILIZE On/Off
There is some tremble as zoom magnification is high, the function
can compensate the tremble.
▶
On / Off
18. SELECT ALARM
Tremble on the screen is removed in the state of FLICKERLESS
‘ON’, the shutter speed, at the same time, is fixed in 1/120sec in
NTSC and in 1/100sec in PAL.
Alarm CH On/Off Page
19. Motion Detection
Set Motion ‘On’ after move the camera where user wants.
It displays the message ‘Motion Detected’ on the screen
when the moving of an object is sensed on the same screen.
◄◄ CAMERA SETUP p2 ►►
10. Back Light : off
11. Set Back Light Mode
12. White Balance : Outdoor
13. Focus Mode : Oneshot
14. Zoom Max Limit : 00X
15. DSS Control : 2 Field
16. Day&Night : Auto-Low
17. Stabilize On/Off : Off
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
10. Back Light : off
11. Set Back Light Mode
12. White Balance : Outdoor
13. Focus Mode : Oneshot
14. Zoom Max Limit : 00X
15. DSS Control : 2 Field
16. Day&Night : Auto-Low
17. Stabilize On/Off : Off
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
18. Select Alarm : Sensor
19. Motion Detection : Off
20. Preset Set & Run Page
21.Trace Set Page
22. Alarm CH On/Off Page
23. Alarm Preset Set Page
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
18. Select Alarm : Sensor
19. Motion Detection : Off
20. Preset Set & Run Page
21.Trace Set Page
22. Alarm CH On/Off Page
23. Alarm Preset Set Page
- PREV MENU PAGE
- NEXT MENU PAGE