6
20) SUB: Selects Subtitles Language.
21) EPG: (Electronic Program Guide) Turns the program guide on.
22) UP / DOWN: Navigates through the Menus. Selects the next or previous
Channel.
23) MENU: Turns on Main Menu
24) FAV: Opens the favorite group selection.
25) VOL+/-: Increases or decreases volume.
26) RECORD: Used to record the program
27) MEDIA:
Goto local video manager.
2.2 Installing the Battery
Remove the battery cover from the Remote Control and put 2”AAA” size batteries
inside the compartment.
The diagram inside the Battery Compartment shows the correct way to install the
batteries.
3.
Connections
Caution: Make sure to check the voltage specification of the wall outlet is the
same rating with the receiver. To prevent the risk of electric shock, do not open
the cover or the back of the receiver.
Note: When connecting the receiver to other equipment, e.g., TV, VCR and
amplifier, make sure to refer to relevant user manual for instruction. Also, make
sure you disconnect all the equipment’s from the mains supply before the
connection.
4. First Installation
After all connections have been made properly, switch on your TV. If you are
using the receiver for the first time or have restored to factory default, the First
Installation menu will appear on your TV screen. Press left/right key to select the
OSD language of your preference. As the same operate to select other setting,
then move to the Next Page , press OK to start search.
