- Press and hold Standby (
) button on front panel and hold ( ) button at the same
time. “
serial upgrad
” message appears on display. Continue in update via
Flash
tools
.
5. Forced HDD formatting
- Press and hold Standby (
) button on front panel and hold (
)button at the same
time.
6. Software update through USB (client) via Flash tools (only 9000HD)
- Press and hold Standby (
) button on front panel. “
USB UPGRADE
” message
appears on display.
Network Update – update via Internet
Network Update service enables direct download of firmware (images) – receiver must be
connected to Internet.
Enter „
Network update
“ from main menu – select corresponding server and choose
„
Update
“. The Receiver will automatically connect to the server – select an image version to
be downloaded and confirm. Upgrade will perform automatically. „Erasing“, „Flashing“
messages appears on display during the process. Wait until the „Done“message appears
and restart your receiver by pressing „Standby“ button. If „Erasing“, „Flashing“ messages do
not appear in several minutes turn off your computer and try upgrade again.
Never turn off the receiver during Erasing“, „Flashing“ messages are displayed !!!!
