I have got my new receiver – what doI do with it....
During the firts running of your receiver just press and hold the MENU button
on front panel – preset video output appears on display.
Select corresponding output: 1080/50 for HDMI, SD-PAL for SCART and press
OK.
AB IPBox 9000HD, 900HD and 910HD receivers are standardly equipped with
AB
software
that originates from an upgrade of original
DGS
software. AB software contains a new
webinterface and adjusted files structure for simple modification by users. It also enables
installation of addons- additional modules for new functions of your receiver.
Common marking of AB softwares is e.g.:
AB_9000HD_070808_r7932_usb_all_noboot
AB – software by AB-COM
9000HD – model, software is designed for
231008 - date of issue (23.10.2008)
R8340 - version of original DGS software that AB sw originates from
usb_all_noboot – type of installation file
AB software also contains basic setting with groups for
Astra 19,2E , Hotbird 13E , Astra
23,5E
and
Thor 0,8W
satellites
.
If you do not use a motor we recommend connection of DiSEqC switch in following
sequence:
Astra 19,2E output 1 (A)
Hotbird 13E output 2 (B)
Astra 23,5E output 3 (C)
Thor 0,8W vstup 4 (D)
If you set your DiSEqC like this then there is no necessity in setting up anything even after
software upgrade.
It is standard for delivered AB software to not support card readers. To enable card readers
you must install SF upgrade for AB image marked as „
addon_version-
9000HD_sh4_260608
“.
You can find it and many more on unofficial web pages
www.satupdate.net
.
Method of installation of all types of addons (up to 8630B version):
Warning: Addons from 9203 version are released as „xxxx usb_db.img“. It means that
such a addon can be installed the same way like main image – via flash tools through
USB or directly through USB flash memory. In this case it is necessary to rename the
addon file into „usb_update.img“.
You can find detailed description of the installation in the User Manual.
