User’s Manual Version 1.3
Airolinx Wireless Serial-Ethernet Server
STW-601C
- 45 -
Fig. 66. Enable Virtual COM mode by Telnet
Running Serial/IP for program on monitoring PC
On Window Start Menu, go to\program\Serial/IP for \Control panel\ select port \then select the serial port.
Then the “Serial/IP for Control Panel” window appears:
Fig. 67. Detail setting from Serial/IP
On the right of the panel is a sample
for COM 4 settings
. On the left is the list of the COM ports that have
been selected (on Select Ports window) for use by the
Virtual COM
Redirector. Change the list by
clicking the Select Ports button.
Each COM port has its own settings. When click on a COM port, the Control Panel changes to reflect
that the selected port.
Note: COM port changes become effective immediately.
Configuring Virtual COM Ports
Serial/IP COM port can be changed as follows:
1. Select a COM port on the list.
2. On
IP Address of Server, enter serial server IP address.
3. On
Port Number, enter the TCP port number of the serial server.
4. On
Server Credentials, the default is No Login Required. If the serial server does require login
by the Virtual COM Redirector, the Virtual COM Redirector must provide a username and/or
password every time an application tries to access the serial server.
5. Click
the
Configuration Wizard button and then click the Start button that shall appear on the
wizard window. This step verifies that the Virtual COM Redirector communicates with the serial
server. If Log display does not show errors, click Use Settings, return to the Control Panel
