AAxeon FCM-CHS2 Series, User Manual, Page: 3 / 16

3
Table of Contents
1. INTRODUCTION
1.1. In-Band Management Chassis - 4
1.2. Management Modules - 6
1.3. Redundant Power Supply - 7
1.4. Connectors, Indicators, and Switches - 7
2. INSTALLATION
2.1. Requirement - 9
2.2. Unpacking the In-Band Management Chassis - 9
2.3. Install slide-in modules -10
2.4. Install the In-Band Management Chassis -11
2.5. Connect slide-in modules to network -11
2.6. Connect redundant power supply (Optional) -12
2.7. Power on the In-Band Management Chassis -12
3. OPERATION
3.1. LED status -13
3.2. Console management -13
3.3. SNMP -13
4. MAINTENANCE
-14
4.1. Fault identification -14
4.2. Hardware replacement procedures -15
4.3. Firmware upgrade -15
Appendix A. Technical Specifications
-16