3
PREPARATION
ASSEMBLING THE DETECTOR
1. Unscrew the knobs on the search coil and remove the knobs
and the connector. Insert the smaller stem and align the
holes on the search coil bracket and the stem. Push the
connector through the holes, then replace and
tig
hten the
knobs.
2. Loosen the stem’s (connected with the handle) lock nut in
the dire
ction
of the arrow. Then insert the smaller stem into
the middle stem. Turn the stem’s lock nut in the reverse
dire
ction
of the arrow to lock it in place.
3. Insert the latch on the S stem into the assembly hole on the
bo
tt
om of the control box. Then slightly push the control box
in the dire
cti
on of IN on the handle to
fix
the latch in place.
Lock nut