
3
ASSEMBLING THE DETECTOR
Assembling your detector is easy and requires no special tools.
Just follow these steps.
1. Insert the latch on the top of the handle into the assembly
hole on the bo
tt
om of the control box. Then slightly push
the control box in the dire
cti
on of IN marked on the handle
to
fix
the latch in place. Secure the control box with
fixing
screw properly.
2. Unscrew the knob on the search coil and remove the knob
connector. Insert the stem and align the holes on the search
coil bracket and the stem. Push the connector through the
holes and
ti
ghten the knob.
3. Press the silver bu
tt
on on the upper end of the lower stem,
and slide the lower stem into the upper stem. Adjust the
stem to a length that you feel comfortable when you stand
Fixing screw
Latch
Control box
Assembly hole
PREPARATION