AAton XTRprod, User Manual

Page: 14 / 109

14
SET
Show
SYNC
Fps/Ft
EX/VAR
time
ISO
batt/iso
MAG
Elapse
1.5 LCD CONTROL PANEL - QUICK REFERENCE
IN SHOW MODE
24’ - 080 Camera speed and Remaining footage (default mode)
ISO = 100 Film ASA (1 x Batt/Iso)
Batt = 10’4 Battery voltage (2 x Batt/Iso)
Ela = 042 Elapsed footage during last take (2 x Speed)
22=32=54 Hours=minutes=seconds in AatonCode (1 x Time)
95-03-25 Year-Month-Day in AatonCode (2 x Time)
123456 Production ID in AatonCode (3 x Time)
2321 Equipment number in AatonCode (4 x Time)
IN SET MODE
Sp =2 4’ Adjusting a preset speed (SET, 1 x SYNC, toggle SYNC or use Jog)
Sp = 27’454 Adjusting a specific speed (SET, 1 x VAR, use Jog)
Et Speed controled by external speed device (SET, 2 x VAR)
Phase Phase Adjusting (Camera running,SET, 2 x VAR, use Jog)
ISO = 100 ASA Setting (SET, 1 x ISO, toggle ISO or use Jog)
MAG = 400 Indicating that the new magazine is fully loaded (SET, 2 x MAG)
MAG = 140 Indicating the new magazine's footage (SET, 1 x MAG, use Jog)
WARNINGS
Lo Spd Camera has not yet reached the selected speed
Lo Batt Battery is too low (below 10V)
Empty No more film in the magazine
Unadjust Please check page 39
No Code Blinking "No Code" means no timecode in the camera (press one button to remove
this messabge