AAton CANTAR X3, User Manual

Page: 49 / 85

Pict. 87
3. User Outmaps
In this mode, all Tracks routed into the current User defined Outmap are sent to the headphones.
Tracks will be routed according to the Outmap. Tracks are played Post-Play-Fader, meaning you
can change the playback Track Level, using the actuator assigned to the Track in order to modify
the attenuation.
Pict. 88
NB :
•
On top of the Vumeters is displayed Track's attenuation.
•
If no actuator is assigned to a played Track, its attenuation can still be changed by
Solo-ing the Track (Solo of any Track, then rotate the Left Crown to access the desired
Track) and then while holding the Shift button press, rotate the Jog wheel.
This mode is symbolized on the Headphone Outmap grid by playback Tracks being active, at
the side designated in the Outmap. Tracks are labelled according to the chosen monitoring
mode: “P” to emphasize the PostFader property or “T” for PreFader mode.
NB : Only Tracks can be activated, other inputs than tracks are marked inactive, except for
Mixdown: if a Mixdown type input is routed on the Outmap, then the Cantar will automatically
play the first track corresponding to the routed Mix input.
Pict. 89
4. Solo
Solo of one or multiple tracks is available. Track(s) is(are) played Mono (to both left and right
ears), Pre-Fader (Track level as it was recorded).
The timeline displays only the waveform(s) corresponding to the selected Track(s).
Cantar X3
49