AAT S-max, Original User Manual

Page: 23 / 44

6.5.3 In sert the s-max into the lo wer bracket on the wheel chair
1.
Plea se use the lo cking bra kes of your wheel chair to avoid any mo ve -
ment of the chair whi le the s-max is being moun ted.
2.
Pull in the s-max's clim ber en ti re ly.
3.
Tilt the s-max slight ly bac kwards and dri ve the de vi ce in the middle
of the wheelchair’s back.
4.
At this point push the s-max for ward un til the lo wer rod
Œ
is in ser -
ted all the way into the lo wer bra cket

on the wheel chair.
6.5.4 In sert the s-max into the up per bracket on the wheel chair
1.
Se lect the lo west clim bing speed.
2.
Push the UP/DOWN switch, di rec ti on UP (ne ver DOWN) so that the
clim ber mo ves in the di rec ti on of the at ten dant bac kward and
downward.
3.
As soon as the clim ber tou ches the ground the de vi ce is lif ted. If the
s-max is po si tio ned in the middle, the up per rod mo ves into the
claws of the up per bra cket
Ž
. The rings are now at the in ner si des of
the bra ckets.
F
Please note the in for ma ti on re gar ding the bra ckets with anti-tilt
sup port in chap ter 6.5.1
4.
As soon as the rod is all the way in the bra cket, the wheel chair is lif -
ted. Re lea se the UP/DOWN switch when the wheechair’s wheels are
ap pro xi ma te ly 1cm off the ground.
6.5.5 Fix the s-max to the wheel chair
1.
Take one of the quick pins

and with your thumb push down the lo -
cking bolt in the middle.
2.
Put the quick pin all the way into the dril led hole

of one of the up -
per bra ckets on the wheel chair and re lea se the lo cking bolt.
3.
Now take the ot her lo cking pin and put it into the ot her bra cket on
the wheel chair as des cri bed in point 2.
Only by using quick pins a strong con nec ti on bet ween s-max and wheel chair
is se cu red.
23
S
-max