5.7
Picking up Loads with the Height-Adjustable Toe Plate (A 310 only)
If your
CargoMaster
is equipped with the optional, height-adjus-
table shovel, you need to put the shovel in the position at which the
load´s center of gravity is positioned between the big wheels and
the smaller supporting wheels as described in chapter 5.3 "Parking
with a Load".
To adjust the height-adjustable toe plate, unlock the particularly
provided spring-urged stop bolts.
Pul out the stop bolt as shown on the picture ...
... turn in by 90°, at which point the stop bolt snaps into a small in-
dentation securing it against turning at ist own.
Adjust the shovel to the appropriate position and turn the stop bolts
again by 90°, at which point they snap back into their grooves.
You might have to slide the shovel back and forth in its guiding de-
vice to make sure that the stop bolts snap into their grooves
securely.
F
The nose must be fully inserted into the groove, see picture.
13
CargoMaster
