5.4
Moving on Level Ground
Push the UP/DOWN-switch and bring the moving gear
in such a position as shown on the picture.
The lifting levers are in a roughly horizontal position
and point backward in reference to their axis of rotati-
on on the frame.
5.5
Adjusting the Handlebars
In order to drive, take up loads, and climb stairs with as little effort
as possible, the handlebars of the
CargoMaster
should be adjusted
to the operator´s height.
For the most comfortable and safe way to use the
CargoMaster
, ad-
just the height of the handlebars to the height of the operator´s
shoulders.
Depending on your type of
CargoMaster
,
adjust the handlebars by
loosening either the fastening levers or the fastening screw knobs
on the frame and push the handlebars into the desired direction.
Make sure that the handlebars are always sufficiently inserted into
the frame, that is, do not pull them out too far. With models featu-
ring round pipe handlebars this is guaranteed, if the slits in the
clamping pipes of the frame are always filled out by the handle-
bars. With models featuring rectangular pipe handlebars, such as
model A 281, stop bolts keep you from pulling out the handlebars
too far. With these models stop bolts also lock the handlebars, even
if they are completely pushed in.
F
After adjusting the handlebars, always make sure that they are secu-
rely fastened.
11
CargoMaster
