24
8.1 Drive on level ground / overcoming obstacles
Set in neutral position (see
Chapter 6.4)
» Retract climbers completely.
Pull the c-max U2 carefully
backwards against curbs/ob-
stacles if you want to over-
come them.
Driving on level ground.
» Push c-max U2.
i
NOTE - Climbers may not be extended because they could become damaged!
i
NOTE - Always navigate obstacles backwards to avoid damaging the safety brakes!
8.2 Tilting the stair climbing system
WARNING - Always tilt the c-max U2 when driving on slopes or during the
climbing process!
Put your foot on the housing
and tilt the c-max U2 slightly
towards you.
» Device must be balanced.
» If there is neither pressure
nor tension noticeable at
the handles, the device is
balanced correctly.
c-max U2 can be moved.
» If you tilt further or too
much, the safety brakes
engage and the c-max U2
can‘t be moved forward any
more.
Manufacturer’s
recommendation:
If you are not able to tilt the
c-max U2 independently,
use the climbers as a
tip-
ping aid
.
» Turn on c-max U2
» Press the UP/DOWN
switch direction UP un-
til the main wheels are
raised by approx. 1-2 cm
» Tilt the c-max U2
» Then retract the climb-
ers completely.
» Move the c-max U2
i
Summary of Contents for c-max U2
Page 38: ...38 Notes...
