16
5 Assembly
5.1 Handle unit and C part with seat
DANGER - Fix the handle unit and C part with seat properly to the climbing unit, otherwise they
could move immediately. Tighten the locking screws.
WARNING - Watch out for pinch points when screwing together.
Remove both locking screws
of the back part . Then,
place the back part on
the guide pins of the climbing
unit and insert the locking
screws.
Attach the C part with seat to
the climbing unit .
» Insert and tighten both
locking screws in the
corresponding holes of the
climbing unit.
Fix the back part.
» Tighten the locking screws
on both sides.
» The back part must be se-
curely fixed.
5.2 Mounting the headrest (optional accessory)
CAUTION - Position the headrest at the level of the back of the head to prevent the head from
falling backwards!
Position the bracket of the
headrest on the marking on
the backrest.
» Fix with screws.
Adjust the height of the head-
rest to the height of the occu-
pant's head.
» Tighten the locking screw.
Summary of Contents for c-max U1
Page 37: ...37 Notes...
Page 38: ...38 Notes...
