Quick Start Reference
41-001515-00 REV00 – 06.2013
6
Handset Call
Remove the Handset/Dialer from the Charger Tray and leave the Microphones in the Charger Tray. Ensure that the Micro-
phone status on the screen of the Handset/Dialer is
off
(grey) for all Microphones. Dial the number, and press the
key.
Conference Call
Remove at least one Microphone from the Charger Tray. Removal of the Handset/Dialer and Speaker from the Charger
Tray is optional. Dial the number, and press the
key.
Switch between Conference and Handset Call
At least one Microphone must be out of the Charger Tray. Press the left soft-key labeled
Handset
or
Speaker
to switch
between the two modes.
Use of Components in Charger Tray
The Handset/Dialer and Speaker work and are active in the Charger Tray. To enable the Microphones in the Charger Tray,
press the multi-function button on the Microphone to turn it on. Microphones in the Charger Tray always start muted and
stay muted unless an active call is taking place. During the call, you can mute and unmute the Microphone by pressing
the button.
Note:
After finishing a call, return the Microphones,Speaker, and Handset/Dialer back to the Charger Tray!
Microphone LED:
Blinking
green
- microphone unmuted
Blinking
red
- microphone muted
Blinking
red
,
orange
,
green
- microphone
connecting to base station
Mute/unmute
microphone
