41-001515-00 REV00 – 06.2013
4
Making a Call
To make a conference call, take at least one of the Microphones out of the Charger Tray, and take the Handset/Dialer out of
the Charger Tray. You can remove all Microphones and the Speaker if you wish, but this is not required. Use the Hand-
set/Dialer to enter the number you want to call, including any leading digits your IP PBX might require.
The Speaker and any Microphones that are not in the Charger Tray will be active during the call.
To finish a conference call, either press the red hang-up button on the Handset/Dialer, or return all Microphones to the
Charger Tray.
To make a call using the Handset/Dialer
, do not remove any Microphone from the Charger Tray before starting to dial
the number. At this point, only the Handset/Dialer will be used for the call.
To end the call
, press the red hang-up button on the Handset/Dialer.
To toggle between handset and conference mode
, remove a Microphone out of the Charger Tray and use the button on
the Handset/Dialer.
To answer a call in conference mode
, simply remove one or more Microphones from the Charger Tray when the Speaker
rings.
If a Microphone is already out of the Charger Tray when an incoming call comes in, press the button on the Microphone to
answer the call in conference mode.
You can also use the Handset/Dialer to answer the call by pressing the green call button on the Handset/Dialer. If all
Microphones are in the Charger Tray at this time, the call will be answered using the Handset/Dialer mode. If at least one
Microphone is switched on and not in the Charger Tray, this will answer the call in conference mode.