Special Calls
24
7.3
Announcement
H*13* Z
(internal tel. no.)
#
For consultation calls:
GR*13* Z
(internal tel. no.)
#
Using this procedure you can make announcements
to system telephones
. The
loudspeaker of the destination telephone is activated without a ring, and your
announcement is heard by those present in the room.
If you want to start an announcement on several system terminals to a hunt group
phone number at which the call is signalled simultaneously for example, all called
subscribers hear the announcement at that same time. If one of these subscribers
responds to the announcement (by answering the call), the announcement con-
nection to the other system terminals is terminated.
Note:
If a called party is a member of a user group for which
“Intercom protection” is activated, announcements will not
be made for his telephone number.
7.4
Intercom
H*131* Z
(device ID)
#
For consultation calls:
GR*131* Z
(device ID)
#
After entering the device ID, you can initiate an announcement to a
single
system
terminal. The microphone is activated on the terminal called and the person you
are calling can immediately answer your announcement. The “intercom” function
cannot be used for announcements to a group of terminals.
Note:
If a called party is a member of a user group for which
“Intercom protection” is activated, announcements will not
be made for his telephone number.
Summary of Contents for OpenCom 100 series
Page 1: ...OpenCom 100 Operation on Standard Terminals Quick Reference Guide...
Page 40: ...Index 38 Notes...
Page 41: ...Index 39 Notes...
Page 42: ...Index 40 Notes...
