Installation and First-Time Operation
78
eu
d
-0
83
0/
2.
0
—
I7
.6
—
0
8.
20
07
n
Wall mounting
You can also mount the phone on the wall. To do so, screw the stand rest onto the wall as a
bracket and hook the phone onto the stand rest.
• Fit the screws for securing the stand rest and mount the stand rest (Figure A).
• Connect the handset cord and the phone cod to the phone (Figure B). For the correct con-
nection assignment refer to the Chapter
"Connecting the Office 70"
, page
79
resp.
"Connect-
ing the Office 70IP"
, page
80
• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards (Figure C-2).
• Unscrew the cams for holding the handset (Figures D-1 to D-3).
• Insert the handset.
Notes:
• As there is only a limited amount of space between the sockets on the back of the phone and the wall
on which it is mounted, you need to use a ribbon cable with a short connector for the cord. Ask your
dealer for a list of suppliers for a suitable ribbon cable (only Office 70IP).
• You can only connect one Office KBM resp. one Office DKBM expansion key module (option) if the
phone is wall-mounted.
1
2
1
2
3
A
B
C
D
151 mm
145
mm
130
mm
65
mm
3.5 mm
eud-0830_en.book Page 78 Monday, August 13, 2007 3:01 PM
