Aastra NeXspan 50 Installation And Maintenance Manual Download Page 41

Page: 41 / 87

Page

01/2007

AMT/PTD/PBX/0062/1/2EN

4 IMPLEMENTING THE IP DECT SERVICE

4.1 PRINCIPLE

To implement an IP DECT installation, a network infrastructure is required, which comprises at
least the following items:

♦
♦
♦
♦

♦
♦

♦

Note :

The radio fixed parts (RFPs)

The portable handsets (PP)

The NeXspan iPBX associated with a GSI gateway

A Red Hat Linux PC server, if you do not wish to use the OMM (OpenMobility Manager)
application from an RFP.

Note: the number of RFPs was defined through a previous radio study (deployment).

The different services required to operate the IP DECT service from the OMM interface are:

TFTP server for loading the RFP software (

ip_rfp.cnt)

on each RFP.

DHCP server for providing the IP address of each RFP and the IP address of the
equipment (RFP or Linux server PC) hosting the OMM application which manages the
SIP DECT STIMULI signalling interface

Debug tool (Syslog daemon).

the DHCP and TFTP servers can be installed on different PCs.

IMPORTANT :

RFP power supply

: if power is remotely supplied to the RFPs, contact the

administrator (need for a remote power switch).

To main IP DECT service implementation phases are:

♦
♦
♦
♦
♦
♦

Configuring the DHCP server

Configuring the TFTP server

Installing and configuring the OMM (licences)

Declaring the PPs in the OMM

Declaring the SIP subscriptions for the portable handsets in the iPBX

Registering the DECT handsets.

Summary of Contents for NeXspan 50
























































































Search results

Summary of Contents for NeXspan 50

Reviews:

Related manuals for NeXspan 50

Brands by name

Popular brands

Aastra NeXspan 50, Installation And Maintenance Manual

Search results

Summary of Contents for NeXspan 50

Reviews:

Related manuals for NeXspan 50

Brands by name

Popular brands