Page
28
01/2007
AMT/PTD/PBX/0062/1/2EN
♦
Locking keys
♦
♦
♦
♦
1.
Integrated directory supporting 50 alphanumerical entries
Adjustable ring tone to distinguish internal calls from external calls
Keypad keys 1 to 9 programmable in the memory for speed dialling (abbreviated
numbers)
Nine languages available: English, French, German, Spanish, Italian, Dutch, Norwegian,
Swedish and Portuguese.
3.12.2 CONFIGURING AN M910 MOBILE TERMINAL
PRELIMINARY OPERATIONS
Check that the handset is not already registered. To cancel the previous registration,
refer to the section “Cancelling the registration of an M910 portable handset”
Check that the handset has been declared on the OMM interface (see the section
“Portable Parts”).
Check that the registration of the handset is authorised on the OMM interface
(Portable Parts/Registration).
3.12.2.1 REGISTERING AN M910 MOBILE TERMINAL
It is important to follow the procedure below when registering the M910 handset for the first time.
On the mobile terminal, the line "Register" is displayed. Press the
Menu
key, select
System
using the
t
u
keys and confirm with
OK
.
2.
Select
Register
and confirm with
OK
.
3.
4.
♦
♦
5.
6.
7.
8.
The line "
PARK ?
:" appears. Enter the installation's PARK. Press
Next
.
The PARK is unique and corresponds to the one declared in the OMM interface.
The line "
BS-PIN
" appears.
If no PIN has been defined in the Portable Part screen, do not make any entry and press
OK
.
If a PIN has been defined in the “Portable Part screen”, enter this PIN and press
OK
.
The line "Name" appears. Enter the name of the PBX on which the mobile terminal has just
been registered and press
OK
to confirm.
The line "
Int No.
" appears. This is a user information line. The number of the mobile can be
entered here, for example, or the number to be called if the mobile is lost. Enter the
information and confirm with
OK
.
Press
Esc
to exit the Registration mode.
To use the mobile terminal only with the previously defined device and not use the “Automatic
search” function, proceed as follows:
Use the
arrows
to select
Menu/System/Select base
.
