Aastra NeXspan 50 Installation And Maintenance Manual Download Page 24

Page: 24 / 87

Page

01/2007

AMT/PTD/PBX/0062/1/2EN

3.11 MOBILE TERMINAL M90X

3.11.1 PHYSICAL DESCRIPTION OF MOBILE TERMINAL M90X

3.11.1.1 DESCRIPTION

The M90x mobile terminal comprises:

♦
♦
♦
♦

The portable handset with its battery

A charger

A power supply cable and mains power unit

A belt clip kit.

For more detailed information, refer to document [3].

Erreur ! Aucun nom n'a été donné au

signet.Erreur ! Aucun nom n'a été donné au signet.

3.11.1.2 SPECIFICATIONS

♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦

Weight: 135 grams.

Dimensions: 135 x 58 x 19 mm.

Autonomy: 10 hours talk time, 100 hours in standby mode.

GAP compatibility (CTR22 standard).

Charger: wall or mobile unit.

Display: 3 lines x 12 characters with 9 icons.

Redial (redial the last 5 numbers called).

Keypad locking, pre-numbering and automatic off-hook.

Integrated directory supporting 20 alphanumerical entries.

Volume amplification, volume control.

Power: 0.25 Watts.

Summary of Contents for NeXspan 50
























































































Search results

Summary of Contents for NeXspan 50

Reviews:

Brands by name

Popular brands

Aastra NeXspan 50, Installation And Maintenance Manual

Search results

Summary of Contents for NeXspan 50

Reviews:

Brands by name

Popular brands