Aastra MBU 400 Administrator Guide
53
Using Configuration Files
Pincode protection is enabled by writing 1 and is disabled by writing 0 in the
corresponding bit field. The values in the three most significant bits are reserved for
future use (currently these values are ignored). The default value is 0x00, disabling
pincode protection on all settings.
Note:
The popup in idle mode announcing new firmware will not be displayed when
the
System settings
menu is pincode protected.
Note:
The popup shown when NAT provisioning fails will not be displayed when the
Internet settings
menu is pincode protected.
Administering Registrations
Handset registrations can be administered by assigning a specific handset to a specific
handset ID. This feature is useful when configuration of features such as call groups
and outgoing line accounts is different for each handset. Without IPEI matching
between handsets and account, handsets may register to different accounts when one
handset is removed from the system, or may swap accounts when registering after a
reset.
Handset IDs are also known as IPEIs, or International Portable Equipment Identities,
and provide a unique identifier for each physical handset unit.
IPEI adminitration uses the following parameters:
<IPEI> can be defined as:
• "a text string of the octal representation of the IPEI, eg:
%DECT_SUBS_1%:"023140003610"
or
• "a comma separated 5 bytes hex number, eg:
%DECT_SUBS_1%: 0x00,0x99,0x80,0x04,0xA2
The IPEI can be retrieved from the handset menu using
Settings
>
System
settings
>
Handset settings
>
Handset ID
. On selected product variants it is also
printed on the handset label and on the product box. The IPEI also appears on the
handset system status page, accessed through pressing the + (volume up) key.
6
Reserved
7 (MSB)
Reserved
Bit
Setting (Continued)
Parameter
Possible values
Description
DECT_SUBS_MATCH_IPEI 0,1 [DISABLE,
ENABLE]
Registration administration
feature.
DECT_SUBS_1
<IPEI>
IPEI value for Handset no. 1
… …
…
DECT_SUBS_8
IPEI value for Handset no. 8
Summary of Contents for MBU 400
