Aastra dialog 3210 User Manual Download Page 40

Page: 40 / 100

Call Forwarding

BusinessPhone – Dialog 4220 Lite / Dialog 3210

Program and activate a new External Diversion address

To set a new Individual External Diversion address:

*22*

Dial.

0 z

Dial the digit(s) for external call access and enter the new
External Diversion address.

A maximum of 24 digits.

Note:

If your public network requires waiting for a second

dial tone, press

Press to activate the Individual Diversion.

Verification tone.

Press to finish the procedure.

Notes:

Before you leave, call your extension to check if the

External Diversion has been set up correctly. This way you

can make sure that the number has been programmed

properly and that your calls will not be diverted to another

person by mistake.

Individual External Diversion can also be used via the DISA

function, see section “

Other Useful Features

” on page 71.

Cancel External Diversion

#22#

Dial.

Press.

Note:

The programmed diversion address is not removed

from the memory, the diversion is just inactive.

Re-activate External Diversion

Divert your calls to an external position.

*22*#

Dial to activate the programmed External Diversion.

You can make outgoing calls as usual. A special dial tone reminds

you that Call Forwarding is active.

Press.

Summary of Contents for dialog 3210




































































































Search results

Summary of Contents for dialog 3210

Reviews:

Related manuals for dialog 3210

Brands by name

Popular brands

Aastra dialog 3210, User Manual

Search results

Summary of Contents for dialog 3210

Reviews:

Related manuals for dialog 3210

Brands by name

Popular brands