Aastra DBC 225 Directions For Use Manual Download Page 65

Page: 65 / 131

4/1553-ANF 901 54 Uen D4 2014-01-14

ALL

FORWARDING

•

Press the soft-key

NoDiversion

(diversion lamp turns OFF).

Using the diversion key

•

Press the Diversion-key (the diversion lamp is turned OFF).

Using a procedure

•

Lift the handset (special dial tone).

•

Dial #21# (dial tone and the diversion lamp is turned OFF).

•

Replace the handset.

Note:

For an additional line, the diversion lamp is not affected

6.2.3 Ordering

follow-me from another telephone

You can order follow-me of your own extension number from another
telephone.

The first step is to allow that follow-me is permitted from another tele-
phone. Do the following from your own telephone:

Using the soft-key Absence

•

Press the soft-key

Absence

•

Frame the menu

Follow Me

•

Press the soft-key

Select

•

Dial own extension number.

•

Press the soft-key

Enter

(diversion lamp turns ON).

Using a procedure

•

Lift the handset (dial tone).

•

Dial *21*own extension number#.

•

Replace the handset.

If you are a member of an internal group hunting group, this procedure
makes you temporarily out of the group, 8.4 Internal group hunting on
page 83 .

To order follow-me from another telephone:

•

Lift the handset (dial tone).

•

Dial *21*own extension number*the extension number of the new
answering position# (special dial tone).

•

Replace the handset.

Summary of Contents for DBC 225




































































































































Search results

Summary of Contents for DBC 225

Reviews:

Related manuals for DBC 225

Brands by name

Popular brands

Aastra DBC 225, Directions For Use Manual

Search results

Summary of Contents for DBC 225

Reviews:

Related manuals for DBC 225

Brands by name

Popular brands