Application Menu
41-001484-11 Rev00 – 09.2013
64
6.
Select
Use Login Credentials
if you want to connect to the LDAP server using the BluStar 8000i user name and
password.
OR keep this option unselected and manually enter in a
Username
and
Password
.
Note:
If LDAP authentication is anonymous, the user name and password fields can be left empty.
7.
Select
Only Use LDAP Directory
if you don't want to use the global directory set up by your system administrator.
8.
Touch the test button to test the user settings configuration.
If the configuration is successful, there will be a green check mark above the test button.
If the test failed, you will see an error message similar to the ones below.
If you see an error message, go back and re-enter the fields with the correct information.
