Aastra 6751I User Manual Download Page 14

Page: 14 / 138

Model 6751i IP Phone User Guide

Getting Started

•

Network Disconnected/Connected

The second line can also display the following status messages, listed in order of display

priority:

•

Call forward status

•

DND On (Do Not Disturb)

•

Number of missed calls

When more than one status message displays, the

s shown after the message to indicate you

can use the

and

navigation keys to scroll through the remaining messages.

Incomplete Configuration

If your phone displays an "

Incomplete Config

" message without any extension or user name at

the end of the start up sequence instead of an Idle state screen, this inidicates the phone

configuration that was downloaded from the configuration server is not complete or correct.

Contact your System Administrator for assistance.

Note:

Since the "Network Disconnected/Connected" display on two lines, the date

and time does not show if this event displays.

John Burns

CFWD All

Jun 8 2:55pm

Network Connected

Summary of Contents for 6751I











































































































































Search results

Summary of Contents for 6751I

Reviews:

Related manuals for 6751I

Brands by name

Popular brands

Aastra 6751I, User Manual

Search results

Summary of Contents for 6751I

Reviews:

Related manuals for 6751I

Brands by name

Popular brands