Indication of Terminated Calls
An Administrator can configure your phone to display a disconnected screen (“Call
Terminated”) when the far-end hangs up. An audible busy signal is also heard on the phone. The
configuration of this feature can also include the maximum time interval that the busy signal is
audible. Contact your System Administrator for more information.
The following is the call terminated screen that displays on the 6757i if this feature is enabled on
your phone:
The following table identifies when a call terminated screen displays on the phone for different
scenarios.
IF
THEN
1 line active and far-end disconnects,
the line in focus:
•
displays disconnected screen.
•
plays busy tone.
•
displays "Call Terminated" message on the screen.
the line not in focus:
•
plays busy tone.
2 or more lines active, and far-end disconnects,
the line in focus:
•
displays disconnected screen.
•
plays busy tone.
•
displays "Call Terminated" message on the screen for 5 seconds.
When 5 second times out:
•
the busy tone stops
•
the disconnected screen disappears.
2 or more lines active, and a line NOT in focus is
disconnected by the far-end,
•
no busy tone plays
•
no disconnected screen displays
•
no “Call Terminated” message displays
An incoming call comes in on the line in focus that
has a disconnected screen displaying,
the line in focus with no calls on hold:
•
displays a ringing screen
the line in focus WITH calls on hold:
•
flashes its’ Line LED
Call Terminated
1
6730i
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
