Model
/
Administration Guide 6
480i CT IP Phone Configuration
480i CT IP Phone
Configuration
The Network and SIP options within
the 480i CT phone can be configured
from the phone or from the Aastra
480i CT Web Client
web interface.
Administrator level options are
password protected in both the phone
and the web interface.
Network
DHCP automatically sends the IP
address, Subnet Mask and Gateway
network (also DNS and FTP Server)
information to the 480i CT phone
during initialization when the phone
is first powered up or reset. By
default, the DHCP setting is enabled.
The network settings cannot be
changed when DHCP is used, so
DHCP must be set to “
Off
” in order to
manually change these settings.
Turn DHCP On or Off
From the 480i CT Phone:
1.
Press the
£
button to enter
the Options List.
2.
Select option
8. Network
.
3.
Enter the administrator’s password.
The default password is
22222
.
4.
Press the
Enter
softkey.
5.
Select option
1. DHCP
.
6.
Press the
Change
softkey to indicate
whether DHCP should be used or
not.
7.
Press
Done
to save the changes.
From the Web Client:
1.
Click on the
Network
sub-category
under the
ADMIN
main category.
2.
Enter the administrator’s user name
and password (the default user
name is “
admin
” and password is
“
22222
”).
3.
In the web page that has just
opened, check the
Use DHCP
check
box to use DHCP and uncheck
to indicate that you do not want to
use DHCP.
4.
Click on the
Set Values
button to
save the changes that you just
made.
Manually Configure
Network Settings
If you are not using DHCP, you need
to configure the network settings for
the phone manually.
From the 480i CT Phone:
1.
Press the
£
button to enter
the Options List.
2.
Select option
8. Network
.
3.
Enter the administrator’s password.
The default password is
22222
.
4.
Select option
2. IP Address
to
change the IP address.
5.
Select option
3. Subnet Mask
to change the subnet mask.
6.
Select option
4. Gateway
to change
the gateway address.
7.
Select option
5. DNS
to change
the DNS.
8.
Press
Done
to save the changes.
When an IP address has been assigned
to the phone, you have the option to
either continue configuring the 480i
CT through the
£
button on
the phone or to start using the Aastra
480i CT Web Client
. See the section
“The Aastra 480i CT Web Client”
within this guide for details.
From the Web Client:
1.
Click on the
Network
sub-category
under the
ADMIN
main category.
2.
Enter the administrator’s user name
and password (the default user
name is “
admin
” and password is
“
22222
”).
3.
In the web page that has just opened
enter the IP address of the phone,
the Subnet Mask and the Gateway
IP address in their corresponding
fields.
