4
Technical Specifications
..
Model
HD-SD-SP
Connectors
BNC
SDI Impedance
75 Ohms
Connector/Coax Return Loss
Return
Data Throughput
270Mbps, 1.485Gbps
Resisting Surge
< 6KV
Discharging Current
10KA
Reaction Speed
1uS
Operating Temperature
0°C ~ 50°C / 32°F ~ 122°F
Storage Temperature
-20°C ~ 60°C / -4°F ~140°F
Relative Humidity
Up to 85% RH (Non-condensation)
*Specifications are subject to change without notice
Key Components
..
Components Made in USA for this product:
Name of Component
Manufacturer
SD SPD
Bourns
TVS
Bourns
*Key components are listed by the manufacturer and are subject to change without notice
In order to achieve the Best Quality and Long Range coax cable run of up to 200m /
600ft, you will need:
1.
Good Quality Cable
: We suggest using RG6 Belden 1694A Low Loss Serial Digital
coax cable because RG6 cables have better grounding than RG59 cables. RG6 is
for Digital Signal and RG59 is for Analog Signal.
2.
Good Quality BNC Connectors
: Contact Plating Gold plated pins provide
exceptional conductivity.
3.
Good Quality Installation
: Do not over cut the braid because it will affect the
grounding. The image will have lines and noise.
IMPORTANT NOTE: Cable & Connector for SDI HD Camera
Bare Copper
Jacket
Braid Shielding
Conductor
Dielectric
Contact Plating
Gold Plated Pin
