Aarrow Stove User Guide
Aarrow i Series cassette stoves benefit from having a convection system which
further encourages this movement of air supplying additional heat to the room.
The colder air is drawn into a chamber at the base of the stove and warms up
as it goes around the back of the stove before entering the room from the top of
the stove.
9
Ongoing care for your Aarrow stove
The following items should be checked on your stove at regular intervals to help
ensure that the safe and efficient use of your stove continues for many years to
come. This should only be done when the stove is unlit and cold.
9.1
Adjusting the door hinges
Once the appliance has been under fire for a period of time the fire door may
appear to have moved out of alignment with relation to the door aperture or
catch. This is quite normal and due to the settling of the casting.
Doors attached with two hinges fixed to the body with screws can be
re-aligned as follows:
When the appliance is cold, open the fire door so that it is at right angles to
the front of the stove and then lift the fire door up off its hinges.
Gently tap the hinge pins to compensate for the misalignment and then re-fit
the door and check to ensure it now sits square to the body; if not repeat the
above steps.
If the fire door needs to be raised, please follow the instructions below:
When the appliance is cold, open the fire door so that it is at right angles to
the front of the stove and lift the fire door up off the hinges.
Drop one washer on the top and bottom hinge pins. Fit the door and check.
Repeat again if necessary.
9.2
Liners / firebricks
The stoves liners (also known as firebricks) may become cracked after long
periods of heavy use or after being knocked by the loading of fuel or a poorly
BK530 Rev13
18