Milan / Paylink System Manual
Issue 1.5 29 January 2020
CONFIDENTIAL
Not to be disclosed without prior written permission from Aardvark Embedded Solutions Ltd
Page 65 of 71
Examples
Hopper at 03 Value 100
- is a hopper whose value is initialised to 100
Hopper at 03 Readout Value
- is a hopper that is unusable unless a coin value can be
read out, or set by the application.
Hopper at 03
- is a hopper that is unusable unless the application sets a
coin value.
Hopper at 03 Value 100 Azkoyen - is a hopper whose value is initialised to 100 and that will
be unconditionally use the Azkoyen protocol variations.
NOTE ACCEPTOR [IS] ELITE
This must follow a
USB
keyword, and specifies that an Elite note is connected directly to the
PC via a USB lead.
COIN RECYCLER [IS] CR01x | BCS
This must follow a
USB
keyword, and specifies that the corresponding coin recycler system
is connected directly to the PC via a USB lead.
COIN RECYCLER [IS] BCR [MAX COINS | FLOAT <level>]
This must follow a
USB
keyword, and specifies that a BCR coin recycler system is connected
directly to the PC via a USB lead. The optional parameter causes the Paylink start-up code to
send the appropriate message to set the level for the hoppers.
