Diagram
Installation
Place the blender on a clean, flat and dry surface.
Make sure a wall socket is within a good distance from the blender.
Always check that unit is OFF before plugging in.
Place the jug into the motor unit and turn it clockwise. Make sure it is properly
attached.
Depending on what you will blend, after you have put all the ingredients, select the
appropriate speed.
The mixture should not exceed the maximum level seen on the jar.
How to use the blender
After the blender is assembled, put the chopped/sliced vegetables or fruits into the
jar.
The best proportion of fruit to water is 2:3.
You can add other ingredients through the centre opening of the top cover.
Plug in the power cord and turn it on. Select the desired and appropriate setting. The
PULSE position accelerates the process of blending. You must hold it to work and
release it to stop.
The 0 setting means to stop the blending. You can set it at this position once you have
consistency of your desired mixture.
Do not use it consecutively for more than three minutes.
Turn the jar counter-clockwise to remove the jar from the base and remove the cover.
You can pour now the mixture in a glass and serve it.
2
Summary of Contents for ARFB-1288G
Page 1: ...ARFB 1288G Blender User s Guide ...
Page 8: ......