Aardee ARFB-1288G, User Manual

Page: 6 / 8

Troubleshooting
Please refer to the table below for common queries on this unit as it may save you time and
money. If your concern is not found on the list or your issue persists, then kindly call our
service centre.
Problem Possible causes Solutions
Motor will
not turn on
 Power cord is damaged.
 Power supply is not
compatible with the
appliance.
 Check the circuit breaker
and make sure it is set to
ON position.
Blender
noise
changes
excessively

The jar is not properly
attached.
 The unit is placed on an
uneven surface.
 Non-food or extremely
hard items were put
inside the jar.

Before mixing anything,
make sure the materials
are properly attached.
 Ingredients must be
sliced or chopped into
pieces.
 Always place it on a flat
surface.
The motor
overheats

The ratio of water and
fruits is not proportional.
 Misused by making the
blender as a grinder.

Follow the right
proportion of the
ingredients.
 Only use the blender for
its intended function.
Cleaning & Maintenance
This blender has an auto clean feature which is design to clean both the jar and blades
easily. To make use of this feature, follow these steps.
Pour a little warm, soapy water into the jar and turn the speed selector to P position for few
seconds.
Select the 0 position and unplug the power cord properly.
Remove the jar and rinse it under running water. Set it aside and dry it.
For the motor, use a damp cloth to clean the outside of it but do not use abrasive
cleansers.
You can also clean the cover, jar, measuring cup using a dishwasher but make sure the
setting does not exceed 60 degrees Celsius.
Once all parts are dry, reassemble them again according to the steps given on this
manual.
3