AAQ AutoLift AL-3000BG, Installation Manual & Operation Instructions

Page: 6 / 29

6
INTRODUCTION
This guide has been made in order to supply the owner as well the user with the basic instructions for a correct installation,
operation and maintenance of the lift.
Read this guide carefully before using the machine and follow the instructions given by this guide carefully to grant the
machine a correct function, efficiency and a long service life.
INTENDED USE
The lift has been designed and constructed for lifting vehicles with the sole purpose of performing service, repairing and
inspection. Any other use not described is to be considered as improper and irrational, and thus it will be under the whole
responsibility of the operator.
The full rise scissor lift is suitable for lifting motor vehicles having maximum total weight of 3000kg/6600 Pounds .
This appliance must be only used for the purpose of which it is expressly designed. It is forbidden to lift people or others not
specified in this manual. Any other use is to be considered improper and irrational and thus highly forbidden.
The constructor cannot be held responsibilities for any damage or injuries caused by an improper use or by the
non-observance of the following instructions:
The lift, in its standard version, is not intended for outdoor use, in this case, it is necessary to ask the constructor for a
special version.
SAFETY SYSTEM
Besides the reliable hydraulic system, this scissor lift also has
a strong safety locking system as showing. right
The safety teeth will automatically engaged when raising.
But, ensures to press teeth engaged button to lower the
whole machine until teeth engaged, then go under
the vehicle.
TECHNICAL DATA
Lifting height 1800mm after installation.
Lifting capacity 3500kg
Lifting time
50S
Power supply 380V, three phase
，
220V, single phase
(Please see nameplate before connecting)