AAQ AutoLift AL-167262, Installation Manual & Operation Instructions

Page: 13 / 29

- - 12
4.
Mount the control box
A
& B
. Mount the control box on the
back or side of the
colum
n
.
Fig. 4-A Fig. 4-B
5.
Connecting
A. According to the connecting diagram, connect t
he
cable
s
to the
appropriate position
.
B. Connect the
240
V/50Hz,
1
phase power supply cable to the control box.
Fig. 5
Note:
A 15Amp plug is required and will need to be connected by a licenced electrician
.
6.
Fuel up
Remove the rubber cap from the top of the reservoir. Fill the reservoir with
approx. 10 litres of
32/46 Non-Detergent Non-Foaming Anti-Wear Hydraulic Oil
(SAE-10)
or until it reaches near
the top.