AAQ AutoLift AL-167251 Installation Manual & Operation Instructions Download Page 3

Page: 3 / 31

AAQ Australia

will offer one-year's quality warranty for the whole machine

，

during which any quality problem will be properly solved

to the user's satisfaction. However, we will not take any responsibility for whatever bad consequence resulted from improper
installation and operation, overload running or unqualified ground condition.
This single post

hoist

is specially designed for lifting motor vehicles that weighs within its outmost lifting capacity. Users are not

allowed to use it for any other purposes. Otherwise, we, as well as our sales agency, will not bear any responsibility for accidents or
damages of the

hoist

. Make sure to pay careful attention to the label of the lifting capacity attached on the

hoist

and never try to

lift cars with its weight beyond.
Read this manual carefully before operating the machine so as to avoid economic loss or personnel casualty incurred by wrong
operation. Without professional advice, users are not permitted to make any modification to the control unit or whatever mechanical
unit.

1.2 Qualified personnel

1.2.1 Only these qualified staff, who have been properly trained, can operate the

hoist

1.2.2 Electrical connection must be done by a competent electrician.

1.2.3 People who are not concerned are not allowed in the lifting area.

1.3 Danger notices

1.3.1 Do not install the

hoist

on any asphalt surface.

1.3.2 Read and understand all safety warnings before operating the

hoist

1.3.3 The

hoist

, if is not specially designed upon customer’s request, is not fit for outdoor use.

1.3.4 Keep hands and feet away from any moving parts. Keep feet clear of the

hoist

when lowering.

1.3.5 Only these qualified people, who have been properly trained, can operate the

hoist

1.3.6 Do not wear unfit clothes such as large clothes with flounces, tires, etc, which could be caught by moving parts of the

hoist

1.3.7 To prevent evitable incidents, surrounding areas of the

hoist

must be tidy and with nothing unconcerned.

1.3.8 The

hoist

is simply designed to lift the entire body of vehicles, with its maximum weight within the lifting capacity.

1.3.9 Always insure the safety latches are engaged before any attempt to work near or under the vehicle.

1.3.10 Make sure to place the lifting pads to the positions as suggested by vehicle makers and when gradually lift the vehicle to the

desired height, operators should be certain that the vehicle will not slant, roll-over o

slide in lifting process.

1.3.11 Check at any time the parts the

hoist

to ensure the agility of moving parts and the performance of synchronization.

Ensure regular maintenance and if anything abnormal occurs, stop using the

hoist

immediately and contact our dealers for help.

1.3.12 Lower the

hoist

to its lowest position and do remember to cut off the power source when service finishes.

1.3.13 Do not modify any parts of the

hoist

without manufacturer’s advice.

1.3.14 If the

hoist

is going to left used for a long time, users are required to:

a. Disconnect the power source;

b. Empty the oil tank;

c. Lubricate the moving parts with hydraulic oil.

1.4 Training

Only these qualified people, who have been properly trained, can operate the

hoist

We are quite willing to provide

professional training for the users when necessary.

Attention: For environment protection, please dispose the disused oil in a proper way.

1.5 Warning signs

All safety warning signs attached on the machine are for the purpose of drawing the user’s attention to safety operation. The labels
must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels carefully

and try to memorize them.

IMPORTANT SAFETY INSTRUCTIONS

1.1 Important notices