AAP Elite S series, Operating Manual

Page: 5 / 32

5
OPERATING YOUR ALARM
GENERAL INFORMATION
Your ELITE S Alarm Controller has been designed with you the user in
mind. Clearly named backlit keys mean you don't have to remember com-
plicated key combinations to achieve normal daily operations. As with eve-
rything about the ELITE S even key functions can be fine tuned to your
specific needs. Please ask your installer for more details.
SINGLE BUTTON or CODE ARMING of THE ALARM
Arming can be achieved with the <ARM> button or using your code.
Arming the alarm will turn on all detectors in the Area or Areas being
Armed. To Arm the alarm press;
<ARM>
Area A,B or both armed LED’s will turn ON or;
<CODE><ENTER>
Area A,B or both armed LED’s will turn ON or;
The two different Arming modes detailed above will arm either a single
area or both areas depending on what Areas are assigned to the keypad,
or code, or both. The installer will advise you on how they have configured
your particular alarm.
There is also a special feature that can be set by your installer to allow the
pressing of the
<ARM> button during the Exit Delay time to Disarm the
alarm. This feature is to allow a quick disarm if you have forgotten to do
something prior to Arming the alarm. The feature is disabled when the
alarm is fully armed following expiry of the exit delay time.
SELECTIVE AREA ARMING of THE ALARM
If the panel is split into two areas and the user and keypad are both
assigned to the two areas it is possible to select which Area or Areas you
wish to Arm. To do this your installer will have programmed the panel to
require the <ARM> button to be pressed before the code to arm the panel.
To selectively Arm the alarm press;
<ARM><CODE><ENTER>
On an LED keypad zone LED’s 1 & 2 will turn ON .
(LED1 = Area A & LED 2 = Area B)