manualshive.com logo in svg

AAON V12100 MHGRV-X, Field Technical Manual

Share
Download
AAON V12100 MHGRV-X Field Technical Manual Download Page 2

TABLE OF CONTENTS

 MHGRV-X Field Technical Guide

 

2

AAON Controls Inc.
8500 NW River Park Drive · Parkville, MO  64152
Toll Free Phone: 866-918-1100
PH: (816) 505-1100 · FAX: (816) 505-1101 
E-mail: [email protected]
Visit our web site at www.orioncontrols.com

www.aaon.com

Copyright June 2018 AAON Controls, Inc. 
AAON

®

  Manual Part No.: V16950, Rev. 01M

AAON

®

 is a registered trademark of AAON, Inc., Tulsa, OK.

AAON Controls assumes no responsibility for errors or 
omissions in this document.
This document is subject to change without notice.

CONTROLLER OVERVIEW ............................................................................................................... 3

Features ................................................................................................................................................................... 3

INSTALLATION & WIRING ............................................................................................................... 4

Important Wiring Considerations .............................................................................................................................. 4
MHGRV-X Controller to AAON Unit Controller Wiring.............................................................................................. 5
MHGRV-X Stand Alone Wiring ................................................................................................................................. 6

INPUTS AND OUTPUTS .................................................................................................................. 7

OPERATION OVERVIEW .................................................................................................................. 8

 

Initialization .............................................................................................................................................................. 8

 

Modulating Hot Gas Valves ...................................................................................................................................... 8
Modes of Operation ................................................................................................................................................. 8
Additional Features .................................................................................................................................................. 9

LCD DISPLAY SCREENS ................................................................................................................ 10

TROUBLESHOOTING ..................................................................................................................... 14

Using LEDs to Verify Operation ............................................................................................................................. 14
Temperature Sensor Testing ........................................................................................................................................15

APPENDIX A - Supply Air Temperature Sensor Guide ................................................................. 18

Supply Air Temperature Sensor Installation ........................................................................................................... 18
Supply Air Temperature Sensor Wiring Chart and Jumper Settings ...................................................................... 19

APPENDIX B .................................................................................................................................. 20

MHGRV-X Replacement of MHGRV II ................................................................................................................... 20

APPENDIX C .................................................................................................................................. 21

Reheat Expansion Module ..................................................................................................................................... 21

PART NUMBER TABLE

PART DESCRIPTION

AAON 

TULSA

MHGRV-X Controller

 V12100

Reheat Expansion Module

 V42450

MODGAS-X Controller

 V12090

Supply Air Temperature Sensor

P87140

EBC E-BUS Cables - Varying Lengths

    N/A

Summary of Contents for V12100 MHGRV-X





























Reviews:

No comments

Brands by name

Popular brands

Load more brands