background image

- 2 -

  The lightning flash with arrowhead 

symbol, within an equilateral triangle, is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage” within 
the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of 
electric shock to persons. 

    The exclamation point within an 

equilateral triangle is intended to 
aler t the user to the presence of 
important operating and maintenance 
(servicing) instructions in the literature 

accompanying the appliance. 

Safety

1  Read these instructions – All the safety 

and operating instructions should be read 

before this product is operated. 

2  Keep these instructions – The safety and 

operating instructions should be retained 

for future reference. 

3  Heed all warnings – All warnings on the 

appliance and in the operating instructions 

should be adhered to. 

4  Follow all instructions – All operating and 

use instructions should be followed. 

5  Do not use this apparatus near water – The 

appliance should not be used near water or 
moisture – for example, in a wet basement 

or near a swimming pool, and the like.

6  Clean only with dry cloth.
7  Do  not  block  any  ventilation  openings. 

Install in accordance with the manufacture’s 

instructions.

8  Do not install near any heat sources such 

as radiators, heat registers, stoves, or 

other apparatus (including amplifiers) that 
produce heat. 

9.  Do not defeat the safety purpose of the 

polarized or grounding plug. A polarized 

plug has two blades with one wider than 

the other. A grounding plug has two blades 
and  a  third  grounding  prong.  The  wide 

blade or the third prong is provided for 

your safety. If the provided plug does not fit 

into your outlet, consult an electrician for 

replacement of the obsolete outlet.

10  Protect the power cord from being walked 

o n  o r  p i n c h e d  p a r t i c u l a r l y  a t  p l u g s, 
convenience receptacles, and the point 

where they exit from the apparatus.

11  Only use attachments/accessories specified 

by the manufacturer.

12 

Use only with the cart, stand, 

tripod, bracket or table specified 

by the manufacturer, or sold with 

the  apparatus.  When  a  cart  or 

rack is used, use caution when moving the 

cart/apparatus combination to avoid injury 

from tip-over.

13 Unplug the apparatus during lightning 

storms or when unused for long periods of 

time.

14  Refer all servicing to qualified personnel. 

Servicing is required when the apparatus 
has been damaged in any way, such as 
power supply cord or plug is damaged, 
liquid has been spilled or objects have 
fallen into the apparatus, the unit has been 
exposed to rain or moisture, does not 

operate normally, or has been dropped.

15 

 This equipment is a Class II or double 

insulated electrical appliance. It has been 

designed in such a way that it does not 
require a safety connection to electrical 

earth.

16 The apparatus shall not be exposed to 

dripping or splashing. No objects filled with 

liquids, such as vases, shall be placed on the 

apparatus.

17 Minimum distance around the apparatus 

for sufficient ventilation is 5cm.

18 The ventilation should not be impeded 

by covering the ventilation openings with 
items, such as newspapers,table-cloths, 
curtains, etc…

19  No naked flame sources, such as lighted 

candles, should be placed on the apparatus.

20 Batteries should be recycled or disposed of 

as per state and local guidelines.

21  The use of apparatus in moderate climates.

Important Safety Instructions

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

Summary of Contents for Studio Bar 100















Reviews: