- 9 -
Adjust the Volume
- Press the
+ / -
buttons on the unit or
VOL+ / VOL-
buttons
on the remote control to adjust the
volume.
- If you wish to turn the sound off, press the
MUTE
button on the remote control. Press the
MUTE
button again or press the
+ / -
buttons on the unit or
VOL+ / VOL-
buttons on the remote control
to resume normal listening.
- While adjusting the volume, the status indicator flashes quickly.
- While the volume level reaches its maximum level, if you press the VOL+ button again, the status
indicator flashes once. While the volume level reaches its minimum level, if you press the VOL-
button again, the status indicator flashes once.
AUX / OPTICAL Operation
1 Ensure that the unit is connected to the TV or audio device.
2 Press the button on the soundbar or press the
AUX
or
OPTICAL
buttons on the remote control
to select the desired mode.
3 Operate your audio device directly for playback features.
4 Press the
VOL +/–
button to adjust the volume to your desired level.
Tip:
In
OPTICAL
mode, if there is no sound output, ensure the audio setting of the input source (e.g.
TV, game console, DVD player, etc.) is set to PCM mode with optical input.
Bluetooth Operation
Pair Bluetooth-enabled Devices
The first time you connect your Bluetooth device to this player, you need to pair your device to this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 26.2 feet (8 m)
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 While the soundbar is ON, press the
button on the soundbar or press the
BT
button on the
remote control to select Bluetooth mode. The Blue indicator will light up.
2 Activate your Bluetooth device and select the search mode. “
A&S Studio Bar
” will appear on your
Bluetooth device list.
- If you cannot find the unit, press and hold the "
BF
/PAIR
" button on the remote control to initiate
device search. After the “
Pairing
” voice prompt, Blue indicator will flash rapidly.
3 Select “
A&S Studio Bar
” in the pairing list. After the “
Paired
” voice prompt, the system is
successfully connected and the Blue indicator will light up solidly.
4 Begin playing music from the connected Bluetooth device.
