Operating instructions for moisture analysers
UX 3081
UX 3081WQ
a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820
E-Mail: info@apinstruments.de, Internet: www.apinstruments.de
Seite 8
3.
Start of query in minutes
Specify the drying period required for the samples without automatic mode. The factory-set 3 minutes
are usually adequate. This value should be increased for extremely low temperatures, so that the device
does not switch itself off prematurely. This affects the UX 3031 in particular, when free moisture is being
measured at 45°C. You can select 1-99 mins.
The timer setting
is the same as described for the quartz heater.
It is possible to select a drying time of 1 – 180 mins
The automatic settings are the same as described for radiant heaters.
Measurement
unit
During measurement, the device optionally displays:
% moisture
% dry matter (TS)
Example: 50 % moisture = 100 % Atro
% moisture Atro ( ), i.e. moisture related to the dry matter
25 % moisture = 33.3 % Atro
Dry matter (TS) in g/1000g
75 % moisture = 300 % Atro
Weight loss g (V)
Residual weight g (R) (current weight)
down
up
set
down
up
set
esc
esc
down
set
set
down
up
esc
set
down
up
set
esc
set
set
esc
down
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
mode
value (weight)
unit
temp. C°
time
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit