Operating instructions for moisture analysers
UX 3081
UX 3081WQ
a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820
E-Mail: [email protected], Internet: www.apinstruments.de
Seite 14
Data interface
Weighing data, temperature and drying data are also shown on the display via a standard USB flash drive and
serial interface.
Depending on the model, a separate UX 3092 printer or a computer can be connected to the device.
Interface description
Model: V24 RS 232 serial data transmission and USB flash drive
Transmission rate:
9600 baud
Number of bits
8 data bits
1 stop bit
Parity check
none
Handshake
none
Data transmission using a USB flash drive
If the computer receiving the data has an internet connection, the system automatically installs a driver
and creates a COM interface, as soon as the computer is connected to the moisture analyser.
If this is not the case, the driver must be manually installed in the device manager.
Special software is required for transmitting data to a PC:
ULTRA X DataBridge
Data can be exported in four different data formats
: . xls; .PDF.
The software is extremely easy to install and use:
Connect devices, place CD in PC, the installation is self-explanatory.
Accessories
:
Order no.:
Application:
Stainless-steel drying tray
10000282 Sample containers (supplied)
Tray tongs
10000230 for lifting the tray ( 2supplied)
Mains cable
H1000190 Mains connection (supplied)
Consumables
:
Printing paper 58 mm
10000234 for printer
Aluminum foils 260 x 130
H1000013 to protect the drying tray
Foil press 230 x 110
10000063 to forming the aluminum foils
Spare Parts:
Ceramic heater 250W
10000405 for 3081
Ceramic heater 400W
10000318 for 2081WQ
1 2 3 4 5
5 4 3 2 1
6 7 8 9
9 8 7 6
Data cable
Moisture balance - DataChannel
ca. 2 m
