A&D ULTRACONNECT UB-1100BLE, Instruction Manual

Page: 5 / 184

English 3
The device and cuff are not water resistant. Prevent rain, sweat and water from soiling the device and cuff.
Measurements may be distorted if the device is used close to televisions, microwave ovens, cellular telephones,
X-ray or other devices with strong electrical fields.
When reusing the device, confirm that it is clean.
Used equipment, parts and batteries are not treated as ordinary household waste, and must be disposed of
according to the applicable local regulations.
Do not modify the device. It may cause accidents or damage to the device.
To measure blood pressure, the wrist must be squeezed by the cuff hard enough to temporarily stop blood flow
through the artery. This may cause pain, numbness or a temporary red mark to the wrist. This condition will
appear especially when measurement is repeated successively.
Any pain, numbness, or red marks will disappear with time.
If you feel strong pain during the measurement, please remove the cuff.
Measuring blood pressure too frequently may cause harm due to blood flow interference.
Avoid tightly folding the cuff for long periods, as such treatment may shorten the life of the components.
When the AC adapter is used, make sure that it can be readily removed from the electrical outlet when
necessary.
Sometimes the temperature of the cuff can reach 44°C in an ambient temperature of 40°C. If you feel the cuff is
too hot, please remove the cuff immediately.
Please do not simultaneous use HF surgical equipment.
Clinical testing has not been conducted on newborn infants and pregnant woman. Do not use on newborn infants
or pregnant woman.
If you have had a mastectomy, please consult a doctor before using the device.
Do not let children use the device by themselves and do not use the device in a place within the reach of infants. It
may cause accidents or damage.
There are small parts that may cause a choking hazard if swallowed by mistake by infants.
Do not touch the batteries and the patient at the same time. That may result in electrical shock.
Wireless communication devices, such as home networking devices, mobile phones, cordless phones and their
base stations, walkie-talkies can affect this blood pressure monitor. Therefore, a minimum distance of 1 meter/3.2
feet should be kept from such devices.