A&D ULTRACONNECT UB-1100BLE, Instruction Manual

Page: 10 / 184

English 8
Symbols that appear on the display (continued)
Symbols Function / Meaning Recommended Action
Err 1
Unstable blood pressure due to movement during
measurement. The systolic and diastolic values are
within 10mmHg of each other.
Take another measurement.
Remain still during measurement.
Err 3
The pressure value did not increase during inflation.
The cuff is not applied correctly.
Apply the cuff correctly, and take another
measurement.
Err 9 Blood pressure monitor internal error.
Press the reset button.
After reset, clock data will disappear.
If the error still appears, contact A&D Medical.
Data is transferring
Airplane mode
Measurements can be taken but device will not
transmit data wirelessly.
Appears when a body or wrist movement is detected.
The reading may yield an incorrect value.
Take another measurement.
Remain still during measurement.
Appears during measurement when the cuff is
attached loosely.
The reading may yield an incorrect value.
Apply the cuff correctly, and take another
measurement.
Firmware is updating.
Appears when irregular heart beat is detected.
Appears when your arm was in the Incorrect position
during measurement, either higher than your heart or
lower than your heart.
Take another measurement and ensure your wrist is at
the same height as your heart.