background image

 English 

2

 

Dear Customers 

 

Congratulations on purchasing a state-of-the-art A&D blood pressure 

monitor, one of the most advanced monitors available today. Designed 

for ease of use and accuracy, this monitor will facilitate your daily blood 

pressure regimen.   

We recommend that you read through this manual carefully before 

using the device for the first time. 

The 

Bluetooth® 

word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by A&D is under license. 

Other trademarks and trade names are those of their respective owners.

 

 

Preliminary Remarks 

 

 

This device conforms to the European Directive 93/42 EEC for Medical 

Products. This is made evident by the 

 mark of conformity.  

 

(0123: The reference number to the involved notified body) 

 

The WML-40AH is approved in accordance to R&TTE directive transmitter 

module marked by 

,

 

manufactured by MITSUMI ELECTRIC CO., 

LTD. to OEM product. 

 

The device complies with part 15 of the FCC rules and contains the FCC 

ID POOWML-C40. 

 

Compliance with Industry Canada.   

IC: 4250A-WMLC40. 

 

The device is a Continua certified, 

Bluetooth®

 wireless technology enabled 

medical device. 

 

The device is designed for use on adults only, not newborns or infants. 

 

Environment for use   

The device is for use in the home healthcare environment. 

 

This device is designed to measure blood pressure and pulse rate of people 

for diagnosis. 

 

Precautions 

 

 

Precision components are used in the construction of this device. Extremes 

in temperature, humidity, direct sunlight, shock or dust should be avoided. 

 

Clean the device and cuff with a dry, soft cloth or a cloth dampened with 

water and a neutral detergent. Never use alcohol, benzene, thinner or other 

harsh chemicals to clean the device or cuff. 

 

Avoid tightly folding the cuff or storing the hose tightly twisted for long 

periods, as such treatment may shorten the life of the components. 

 

The device and cuff are not water resistant. Prevent rain, sweat and water 

from soiling the device and cuff. 

 

Do not replace the batteries during use of the device.   

Summary of Contents for UA-767 Plus






















Reviews: