![background image](http://html1.mh-extra.com/html/aandd/ra3100-omniace/ra3100-omniace_simple-instruction-manual_446281034.webp)
4.Configuring Measurement - 4.3.Recording Setup
34
1WMPD4004445
4.3. Recording Setup
4.3.1. Setup the Sampling Speed
An image of the waveform recorded on the selected recording device (PRINTER, SSD, or MEMORY) is
displayed on the waveform monitor.
The sampling speed of the image waveform recorded on the selected recording device is displayed on
the left edge of the control bar.
An image of the waveform
recorded on the selected
device is displayed on the
waveform monitor.
Tap to display the selectable sampling speed table.
Tap the sampling speed to
display the waveform sampled at
that speed.
Drag the table to the left or right
to display the hidden speed table.
When the sampling speed is decided, tap OK on the right edge to close the table.